Worklon Medical Masks Coveralls

/Worklon Medical Masks Coveralls
  • LD-100 system offers apparel for the pharmaceutical, medical device and food industry where particulate control is required. Polyester Herringbone coveralls are worn in cleanrooms up to and including a Class 100 (ISO 5). LD-100 Polyester Taffeta frocks are donned in controlled environments up to and including Class 1000 (IS0 6). Hoods and boots are available in Polyester Taffeta. When worn with Herringbone coveralls, these Taffeta accessories are suitable in Class 100 (ISO 5) cleanrooms.
    • Polyester taffeta uppers
    • Hypalon soles
    • Full elastic opening
    • Rear snap adjustment
    • Generous sizing
    • Color-coded stitching denotes size
    • Gamma compatible and autoclavable
  • SC-3 apparel system is engineered to meet up to and including a Class 10 (ISO 4) cleanroom's rigid demands for the microelectronics, semiconductor, disk drive, laser and similar industries. This polyester with carbon grid, Burlington C3™ high density apparel system, is designed to guard against airborne particles and to dissipate static charges.
    • Burlington C3™ uppers
    • Hypalon soles
    • Full elastic opening
    • Rear snap adjustment
    • Generous sizing
    • Color-coded stitching denotes size
  • LD-100 system offers apparel for the pharmaceutical, medical device and food industry where particulate control is required.
    • Polyester tricot
    • Three horizontal snaps on each side for adjustable attachment to hood
    • Gamma compatible and autoclavable
    • Poly/Cotton Woven Seersucker
    • Seersucker offers the advantage of durability and no ironing effort
    • Attached belt, two large lower pockets
    • California Fire Marshall’s Title 19
    • Poly/Cotton Woven Seersucker
    • Seersucker offers the advantage of durability and no ironing effort
    • Attached belt, two large lower pockets
    • California Fire Marshall’s Title 19
    • Poly/Cotton Woven Seersucker
    • Seersucker offers the advantage of durability and no ironing effort
    • Attached belt, two large lower pockets
    • California Fire Marshall’s Title 19
  • SC-3 apparel system is engineered to meet up to and including a Class 10 (ISO 4) cleanroom's rigid demands for the microelectronics, semiconductor, disk drive, laser and similar industries. This polyester with carbon grid, Burlington C3™ high density apparel system, is designed to guard against airborne particles and to dissipate static charges.
    • Burlington C3™
    • Zipper front closure
    • Two-ply reinforced placket
    • Anti-static knit cuffs
    • Adjustable snaps at collar and ankles
    • Three vertical snaps on the back of legs for adjustable boot attachment
    • Color-coded hang loop denotes size
  • Intersuit Systems replace street clothes normally worn under cleanroom apparel. Substituting garments of natural fibers and multi-blended fabrics to 100% continuous filament polyester eliminates a source of lint bearing material. Lightweight, opaque Intersuits are available with NANO- DRY™ moisture control technology in Microdenier Sandwash and carbon yarn grid, limited linting Microdenier Sandwash ESD fabrics.
    • Limited Linting Microdenier Sandwash
    • Multi-stitched elastic waistband
    • Ankles are partial elastic with snap adjustment
  • SC-3 apparel system is engineered to meet up to and including a Class 10 (ISO 4) cleanroom's rigid demands for the microelectronics, semiconductor, disk drive, laser and similar industries. This polyester with carbon grid, Burlington C3™ high density apparel system, is designed to guard against airborne particles and to dissipate static charges.
    • Burlington C3™
    • Zipper front closure
    • Two-ply reinforced placket
    • Anti-static knit cuffs
    • Adjustable snaps at collar and ankles
    • Three vertical snaps on the back of legs for adjustable boot attachment
    • Color-coded hang loop denotes size
  • SC-3 apparel system is engineered to meet up to and including a Class 10 (ISO 4) cleanroom's rigid demands for the microelectronics, semiconductor, disk drive, laser and similar industries. This polyester with carbon grid, Burlington C3™ high density apparel system, is designed to guard against airborne particles and to dissipate static charges.
    • Burlington C3™
    • Zipper front closure
    • Two-ply reinforced placket
    • Anti-static knit cuffs
    • Adjustable snaps at collar and ankles
    • Three vertical snaps on the back of legs for adjustable boot attachment
    • Color-coded hang loop denotes size
  • HD-ESD System offers a polyester with carbon yarn stripe fabric. Acceptable for aseptic environments, this static dissipative apparel program is constructed of Maxima® High Density ESD. HD-ESD garments can be worn in a variety of industries which include pharmaceutical, biotechnical, biological and food processing. Designed for cleanrooms up to and including Class 10 (ISO 4), where bacterial filtration, static charges, particulate and fluid resistance needs to be controlled.
    • Maxima® High Density ESD
    • Zipper closure
    • Anti-static knit cuffs
    • Two-ply reinforced placket
    • Adjustable snaps at collar and ankles
    • Three vertical snaps on back of legs for adjustable boot attachment
    • Color-coded hang loop denotes size
    • Gamma compatible and autoclavable
  • Intersuit Systems replace street clothes normally worn under cleanroom apparel. Substituting garments of natural fibers and multi-blended fabrics to 100% continuous filament polyester eliminates a source of lint bearing material. Lightweight, opaque Intersuits are available with NANO-DRY™ moisture control technology in Microdenier Sandwash and carbon yarn grid, static dissipative Microdenier Sandwash ESD fabrics.
    • Microdenier Sandwash ESD
    • Multi-stitched elastic waistband
    • Ankles are partial elastic with snap adjustment