-
• Partial elastic with adjustable snap tab opening • Rear snap attaches to coverall • Color-coded buckled instep strap denoting size • Style 1212 only available in S-XL Unisex Sizes: XS-XL (2XL extra charge) -
Polyester comfort fiber short sleeve, concealed button front closure, contrast trim on sleeve and neckline. -
Intersuit Systems replace street clothes normally worn under cleanroom apparel. Substituting garments of natural fibers and multi-blended fabrics to 100% continuous filament polyester eliminates a source of lint bearing material. Lightweight, opaque Intersuits are available with NANO- DRY™ moisture control technology in Microdenier Sandwash and carbon yarn grid, limited linting Microdenier Sandwash ESD fabrics.- Limited Linting Microdenier Sandwash
- Raglan sleeves
- Polyester navy knit cuffs
- Three snap reinforced placket opening
- Color-coded hang loop denotes size
-
◦ Front and sleeves constructed of single-ply fluid-resistant barrier fabric ◦ Back constructed of Polyester / Cotton blend ◦ Concealed placket front with snap closure ◦ Throat-Guard collar with adjustable snap closure for improved neck protection ◦ Left chest pocket ◦ Two lower pockets ◦ Side slits for pocket access ◦ Back vent ◦ Knit cuffs ◦ PFAS-Free Fabric ◦ Style 6432 has no pockets PFAS-Free Texture Shield® (Front) Polyester / Cotton Blend (Back) Sizes: XS-XL (2XL, 3XL extra charge) *Style 6418 available up to 6XL (2XL-6XL extra charge) -
•Texture Shield* front and sleeves made of single-ply fluid-resistant barrier fabric •Back made of Polyester/Cotton blend •Concealed placket front with snap closure •Throat-Guard collar with “hook and loop” closure for improved neck protection •Two lower pockets •Left Breast Pocket •Back vent •Knit cuffs •Sizes: XS-XL (2XL, 3XL extra charge) -
•Front and sleeves made of Texture Shield* single-ply fluid-resistant barrier fabric •Back made of Polyester / Cotton blend Concealed placket front with snap closure •Throat-Guard collar with adjustable snap closure for improved neck protection •Two lower pockets •Left breast pocket •Side slits for pocket access •Back vent •Knit cuffs •Sizes: XS-XL (2XL-3XL at extra charge) Please seperate each embroidery line with a (:) -
•Front and sleeves made of Texture Shield* single-ply fluid-resistant barrier fabric •Back made of Polyester / Cotton blend •Concealed placket front with snap closure •Throat-Guard collar with adjustable snap closure for improved neck protection •Two lower pockets •Left breast pocket •Side slits for pocket access •Back vent •Knit cuffs •Sizes: XS-XL (2XL-6XL at extra charge) Please seperate each embroidery line with a (:) -
HD-ESD System offers a polyester with carbon yarn stripe fabric. Acceptable for aseptic environments, this static dissipative apparel program is constructed of Maxima® High Density ESD. HD-ESD garments can be worn in a variety of industries which include pharmaceutical, biotechnical, biological and food processing. Designed for cleanrooms up to and including Class 10 (ISO 4), where bacterial filtration, static charges, particulate and fluid resistance needs to be controlled.- Maxima® High Density ESD uppers
- Hypalon soles
- Partial elastic with adjustable snap tab opening
- Rear snap attaches to coverall
- Color-coded buckled instep strap denotes size
- Gamma compatible and autoclavable
-
Intersuit Systems replace street clothes normally worn under cleanroom apparel. Substituting garments of natural fibers and multi-blended fabrics to 100% continuous filament polyester eliminates a source of lint bearing material. Lightweight, opaque Intersuits are available with NANO-DRY™ moisture control technology in Microdenier Sandwash and carbon yarn grid, static dissipative Microdenier Sandwash ESD fabrics.- Microdenier Sandwash ESD
- Multi-stitched elastic waistband
- Ankles are partial elastic with snap adjustment
-
◦ Front and sleeves constructed of single-ply fluid-resistant barrier fabric ◦ Back constructed of Polyester / Cotton blend ◦ Concealed placket front with snap closure ◦ Throat-Guard collar with adjustable snap closure for improved neck protection ◦ Left chest pocket ◦ Two lower pockets ◦ Side slits for pocket access ◦ Back vent ◦ Knit cuffs ◦ PFAS-Free Fabric ◦ Style 6432 has no pockets PFAS-Free Texture Shield® (Front) Polyester / Cotton Blend (Back) Sizes: XS-XL (2XL, 3XL extra charge) -
- 65% Polyester / 34% Cotton / 1% Carbon in a woven grid configuration
- 30” length
- Snap closure
- Lapel collar
- Three patch pockets
- Set-in sleeves
- Adjustable snaps at wrists
- Color-coded hang loop denotes size
- Color-Royal
-
ESD lab wear is donned in microelectronic company's assembly; repair, testing, packaging and other cleanroom peripheral areas where static control remains critical for the unimpairment of the product. Microstat Coats 80% Polyester/19% Cotton/1% Carbon Suffused Nylon Grid. Snap front closure. Lapel collar. Three patch pockets. Adjustable snaps at wrists. Color-coded hang loop denotes size.- Snap front closure
- Lapel collar
- Three patch pockets
- Set-in sleeves
- Adjustable snaps at wrists
- Color-coded hang loop denotes size
- 30" length based on size medium
-
Intersuit Systems replace street clothes normally worn under cleanroom apparel. Substituting garments of natural fibers and multi-blended fabrics to 100% continuous filament polyester eliminates a source of lint bearing material. Lightweight, opaque Intersuits are available with NANO- DRY™ moisture control technology in Microdenier Sandwash and carbon yarn grid, limited linting Microdenier Sandwash ESD fabrics.- Limited Linting Microdenier Sandwash
- Set-in sleeves
- Elasticized wrists
- Three snap reinforced placket opening
- Color-coded hang loop denotes size
-
ESD lab wear is donned in microelectronic company's assembly; repair, testing, packaging and other cleanroom peripheral areas where static control remains critical for the unimpairment of the product. Microstat Coats 80% Polyester/19% Cotton/1% Carbon Suffused Nylon Grid. Snap front closure. Lapel collar. Three patch pockets. Adjustable snaps at wrists. Color-coded hang loop denotes size.- Snap front closure
- Lapel collar
- Three patch pockets
- Set-in sleeves
- Adjustable snaps at wrists
- Color-coded hang loop denotes size
- 30" length based on size medium
-
LD-100 system offers apparel for the pharmaceutical, medical device and food industry where particulate control is required. Polyester Herringbone coveralls are worn in cleanrooms up to and including a Class 100 (ISO 5). LD-100 Polyester Taffeta frocks are donned in controlled environments up to and including Class 1000 (IS0 6).- Full snap closure
- Raglan sleeves
- Polyester Taffeta
- Adjustable snaps at collar
- Polyester knit cuffs
- Two-ply reinforced placket
- Color-coded hang loop denotes size
- Gamma compatible and autoclavable
-
DuraPil Acrylic. Fine gauge knit sleeveless vest. -
LD-100 system offers apparel for the pharmaceutical, medical device and food industry where particulate control is required. Polyester Herringbone coveralls are worn in cleanrooms up to and including a Class 100 (ISO 5). LD-100 Polyester Taffeta frocks are donned in controlled environments up to and including Class 1000 (IS0 6).- Full snap closure
- Raglan sleeves
- Polyester Taffeta
- Adjustable snaps at collar
- Polyester knit cuffs
- Two-ply reinforced placket
- Color-coded hang loop denotes size
- Gamma compatible and autoclavable
-
- 100% Sanforized cotton heavyweight twill
- Cloth knot buttons
- Left breast pocket
- Two lower outside pockets
- Two-piece attached back belt
- Side slits for pocket access
- 41" length based on size 40
-
Polyester/Yarn-Dyed short sleeve, button front closure, contrast lapel, two lower pockets, keyholder pocket inside right pocket inside right pocket. -
Polyester/Yarn-Dyed short sleeve, button front closure, contrast lapel, two lower pockets, keyholder pocket inside right pocket inside right pocket. -
-
LD-100 system offers apparel for the pharmaceutical, medical device and food industry where particulate control is required. Polyester Herringbone coveralls are worn in cleanrooms up to and including a Class 100 (ISO 5). LD-100 Polyester Taffeta frocks are donned in controlled environments up to and including Class 1000 (IS0 6).- Full snap closure
- Raglan sleeves
- Polyester Taffeta
- Adjustable snaps at collar
- Polyester knit cuffs
- Two-ply reinforced placket
- Color-coded hang loop denotes size
- Gamma compatible and autoclavable
-
- 100% Sanforized Cotton Heavyweight Twill
- 39" Length based on size medium
- Left breast pocket
- Two lower outside pockets
- Front and back princess seams
- Two piece attached back belt
-
•100% Sanforized Cotton Heavyweight Twill •39 ½" length (based on size medium) •Cloth knot button front •Left breast pocket •Two lower outside pockets •Two piece attached back belt with two cloth knot buttons fro adjustable closure •Sizes: XXS - XL (2XL, 3XL extra charge) Please seperate each embroidery line with a (:) -
LD-100 system offers apparel for the pharmaceutical, medical device and food industry where particulate control is required. Polyester Herringbone coveralls are worn in cleanrooms up to and including a Class 100 (ISO 5). LD-100 Polyester Taffeta frocks are donned in controlled environments up to and including Class 1000 (IS0 6).- Full snap closure
- Set-in sleeves
- Polyester taffeta
- Elasticized wrists
- Adjustable snaps at collar
- Color-coded hang loop denotes size
- Gamma compatible and autoclavable
-
Intersuit Systems replace street clothes normally worn under cleanroom apparel. Substituting garments of natural fibers and multi-blended fabrics to 100% continuous filament polyester eliminates a source of lint bearing material. Lightweight, opaque Intersuits are available with NANO- DRY™ moisture control technology in Microdenier Sandwash and carbon yarn grid, limited linting Microdenier Sandwash ESD fabrics.- Limited Linting Microdenier Sandwash
- Multi-stitched elastic waistband
- Ankles are partial elastic with snap adjustment
-
-
LD-100 system offers apparel for the pharmaceutical, medical device and food industry where particulate control is required. Polyester Herringbone coveralls are worn in cleanrooms up to and including a Class 100 (ISO 5). LD-100 Polyester Taffeta frocks are donned in controlled environments up to and including Class 1000 (IS0 6). Hoods and boots are available in Polyester Taffeta. When worn with Herringbone coveralls, these Taffeta accessories are suitable in Class 100 (ISO 5) cleanrooms.- Polyester taffeta uppers
- Hypalon soles
- Partial elastic opening with adjustable snap tab
- Rear snap attaches to coverall
- Color-coded, buckled instep strap denotes size
- Gamma compatible and autoclavable
-
EcoPoly Three button front, princess seams, moisture management lining, two lower double besom welt pockets, longer length. -
-
Polyester/Yarn-Dyed short sleeve, contrast mock shawl collar and cuffs, concealed zip front closure side seam pockets, keyholder pocket inside right pocket. -
EcoPoly Three button front, princess seams, moisture management lining, two lower double besom welt pockets, longer length.
-
- Fashion Shield® Front
- Polyester/Cotton Blend (Back)
- Front and sleeves made of single-ply fluid-resistant barrier fabric
- Concealed placket front with snap closure
- Throat-Guard collar with “hook and loop” closure for improved neck protection
- Two lower pockets
- Back vent
- Knit cuffs
- Sizes: XS-XL (2XL, 3XL extra charge)
-
• Adjustable snap closure • Hood’s bib drapes across shoulders • Two sets of vertical snaps for face mask attachment • Rear horizontal snap adjustment • Color-coded hang loop denoting size Unisex Sizes: S-XL (2XL extra charge) -
◦ Front and sleeves constructed of single-ply fluid-resistant barrier fabric ◦ Back constructed of Polyester / Cotton blend ◦ Concealed placket front with snap closure ◦ Throat-Guard collar with “hook and loop” closure for improved neck protection ◦ Two lower pockets ◦ Back vent ◦ Knit cuffs ◦ PFAS-Free Fabric PFAS-Free Fashion Shield® (Front) Polyester / Cotton Blend (Back) Sizes: XS-XL (2XL, 3XL extra charge) -
- Front and sleeves made of single-ply fluid-resistant barrier fabric of Fashion Shield® - a high count, densely woven fabric employing 100% continuous filament man-made polyester yarns, offering excellent fluid resistance properties
- Back made of polyester/cotton blend
- Concealed placket front with snap closure
- Throat-Guard collar with hook & loop closure for improved neck protection
- No chest pocket
- Two lower pockets
- Back vent
- Knit cuffs
- Permanent grid for process cycle control
- Compliant with OSHA's Rule 29 CFR, Part 1910.1030 "Occupational Exposure to Bloodborne Pathogens-Final Rule"
Call Us Today! (800) 576-2750|customerservice@staruniforms.com
